Stretch Single Drop Trailers are the longer version of the Step Deck Trailer. They are used to transport loads and freight that are too long to fit on a Standard Step Deck Trailer.
Standard Specifications of a Stretch Single Drop Trailer
STRETCH SINGLE DROP TRAILER LENGTH
The main difference from the Standard Double Drop Trailer is that it is can be up to 63′ in length, as compared to the 37′ length on a Standard Step Deck.
STRETCH SINGLE DROP TRAILER WIDTH
Same as the Standard Step Deck Trailer, the actual width is 102 inches, but the load width is legally required to be 8 feet 6 inches.
Usually, your freight is allowed to overhang the edges of the trailer, but each state has different requirements. It’s important to know which permits are needed for this. So, be sure to check with our specialists when you fill out a Flatbed Quote, or check your state’s documentation.
A good thing to note is that most over-wide shipments requires travel only during daylight hours.
STRETCH SINGLE DROP SHIPMENT WEIGHT
The weight limit for Stretch Single Drop Trailer is a little less than that of the Standard Step Deck Trailer and is required to be no more than 45,000 Lbs.
STRETCH SINGLE DROP LEGAL SHIPMENT HEIGHT
The legal height for a Stretch Single Drop Trailer is about a foot less than what you would get on a Standard Step Deck Trailer. So you cannot go above 10′ without getting a permit.